Why Are Two Universal Joints Required Whenever I Do A U-Joint Replacement?

Are you replacing a universal joint on your truck, SUV, or fleet vehicle anytime soon?It’s a good idea to get two replacement u-joints instead of one. It’s because you need to replace your u-joints in pairs, even if one of your u-joints has failed and the other one still looks fine. When one of your u-joints fails, the other one will fail soon.

How A Bad U-Joint Affects The Other One

old ujoint

U-joints are strong steel X-shaped parts with a single bearing cap at each end. The design of u-joints enables the driveshaft to rotate smoothly while connected to the differential and the transfer case (or transmission). They allow the driveline to flex with minimal friction.

When a u-joint fails, the driveshaft moves outside of its normal rotational path. This creates excessive vibration and friction. This not only further damages the failed u-joint, but it also damages the other u-joint. Both u-joints will undergo some damage, such as:

  • Loss of lubrication
  • Worn seals
  • Extreme wear and tear

All u-joints need lubrication. Grease allows the u-joint to move freely. The lubrication also protects the u-joint from corrosion and moisture. Over time, the u-joint begins to wear out, which results in increased friction inside the joint. The increased friction causes heat to build up in the u-joints. When this happens, the grease degrades. The u-joints lose lubrication and their seals wear out.

The first u-joint to fail has more damage than the second u-joint. So a lot of people think that the second u-joint is still fine. The truth is, the second u-joint is already starting to fail. So when you need to replace a u-joint, always replace the other one too. If you don’t, the other one will fail sooner or later. The failure of that u-joint will cause damage to the new u-joint (that replaced the first one). It’s always better to replace both u-joints at once.

Some Vehicles Have More Than Two U-Joints

multiple ujoints

Be sure to know how many u-joints your vehicle has. There are typically two u-joints to replace on either end of the drive shaft. Some driveshafts have a double-cardan joint at the front, which contains two u-joints. So there are three U-joints to replace. It’s best to replace them all at once.

MORE CONTENT

Stay current!

Sign up here to get the latest news
and updates on all things GMB.

Sign Up To Receive GMB News & Updates!

This field is for validation purposes and should be left unchanged.
GMB_blog-footer-subscribe-image